BC1-Add-on Add-on battery camera only works with the base station
Category: Wire-Free Cameras
Specifications
Details
Specifications
Specifications | |
---|---|
Model | CS-BC1-A0-2C2WPBL |
System Parameters | |
Processor | High-Performance Embedded SOC Processor |
Operating System | Linux |
Camera Parameters | |
Image sensor | 1/2.8” 2-Megapixel Progressive Scan CMOS Sensor |
Lens | 2.8 mm @ F1.6; 128° (Diagonal), 108° (Horizontal) |
Lens Mount | M12 |
Night Vision | IR Distance:10m, IR-cut filter with auto-switching |
Video Parameters | |
Video Compression | H.265 |
Max. Resolution | FHD 1920 x 1080 |
Frame Rate | 15fps. Self-Adaptive during network transmission |
DNR | 3D DNR |
WDR | DWDR |
Audio Parameters | |
Audio Input | Built-in omnidirectional microphone |
Audio Output | Built-in loudspeaker |
Audio Quality | Noise suppression |
Camera Event | |
Sensor | PIR Motion Detection Sensor |
Alarm | Customized Alert Area |
Siren | 105 dB built-in siren |
Camera Network Parameters and Storage | |
Wireless | Built-in 2.4G Wi-Fi |
Network Configuration | AP Pairing |
Minimum Network Requirement | 1Mbp |
Local Storage | Support MicroSD card up to 256 GB in Base Station |
Cloud Storage | EZVIZ Cloud Storage |
Base Station Parameters | |
Camera pairing | Support up to 4 BC1 cameras |
Buttons | 1 SYNC button; 1 POWER button; 1 RESET button (hold 5 seconds to RESET) |
Siren | 125 dB built-in siren |
Local Storage | MicroSD card slot on the base station (up to 256 GB) |
Antenna | 2.4G: 2 internal @ 3dB |
Indicator | RGB 3 LED Indicator; 1 network Indicator |
USB | Do not support |
Network Interface | 1 RJ-45 10/100Mbps Self-adaptive Ethernet WAN interface. |
Wireless Interface | Support 2.4G connection. The actual available channels vary according to the sales area regulations. Theoretical maximum rate is 144M at 802.11b/g/n. |
Power | 12V/1A typical power consumption < 12watts; The adapter supports a wide voltage range from 100V~240V |
General | |
Operating Conditions | -20°C to 45°C (-4°F to 113 °F), Humidity 95% or less (non-condensing) |
Power Supply | 12900mAh Rechargeable Lithium Battery or 5V DC |
Power Consumption | Max. 5W |
IP Grade | IP 66 |
Dimensions | Camera: 104.76 x 62.80 x 62.80 mm (4.12 x 2.47 x 2.47 inch) |
Packaging Dimensions | 186.00 x 103.00 x 103.00 mm (7.32 x 4.05 x 4.05 inch) |
Weight | 851 g (30 oz) |
In the box | |
In the box: | - BC1 Camera |
- Magnetic Base | |
- Screw Base | |
- Power Adapter (For Camera) | |
- USB Cable | |
- Mounting Plate | |
- Drill Template | |
- Screw Kit | |
- Regulatory Information | |
- Quick Start Guide | |
Certifications | |
Certifications: | CE/FCC/WEEE/ROHS/REACH/UL |
View more about BC1-Add-on Add-on battery camera only works with the base station on main site